Automated Heavy Duty Sliding (Bi-Parting)

The Paramount Series 4 Bi-Parting Sliding Gates are manufactured in Canti-lever Format. The design uses heavy-duty steel sections designed to withstand an impact from a Potential Intruder.

Our Bi-Parting Canti-lever range offers advantages over conventional tracked gates; they are ideal for bridging uneven road surfaces, railway lines or even harbour entrances, on road widths between 6.0m and 20.0metres wide, and 1.0m to 3.0m high.

The Paramount Series 4 Bi-Parting Is ahead of other automated gates with many features, which make the gate truly unique, and an aesthetic solution to any security issue, regardless of the type of premises requiring protection.

The Paramount type 4 gate is fully welded and is formed into one constructional section. This minimizes the risk of injury should a vehicle collide with the gate.

All of our automated ranges have been type approved and tested by a certified testing facility, and hold full CE accreditation. Each gate leaf slides at an impressive 300mm per second, with a total combined opening speed offering an impressive 600mm per second. Whilst it is travelling in both the open and closing cycles the drive system continuously monitors the gate leaf. The gate reverses or stops should it come into contact with an object, person or vehicle complying with the latest European Safety requirements. A highly reliable chain driven propulsion system operates the gate with smooth, quiet precision and exceptional reliability making the Series 4 a popular choice of many Architects, Police forces and Local authorities.
GATE LEAF INFILL OPTIONS Tubular Steel, Box Steel Section, Vertical Bar, Palisade and most mesh systems can be accommodated. Due to safety legislation we provide all of our gates with a protection mesh installed behind any vertical cladding. This protection measure prevents a person from inserting arms or limbs through the travelling gate leaf.
The Paramount Bi-Parting series has been designed to provide the end user with exceptional reliability and accuracy. Any Bi-Parting sliding gate must stop very accurately to not only maintain the site security but also to prevent damage to either of the travelling gate leafs.
	Pressure sensitive edges protect the travel area of the gate, preventing accidental injury. The edges offer enhanced protection from injury to adults or children should contact with a moving section arise
POWER FAILURE OPTION Our Optional Power back up inverter, is a popular choice on Fire Stations, Police Stations, and any location where access is essential. The inverter operates within our drive system, and can provide seamless operation should the mains power fail allowing the gate to operate up to 10 times of normal operation. Alternatively the system can be configured to open the gate immediately upon a power failure and hold it open until the mains are restored
SYSTEM FEATURES Ø Optional- Anti-Tail gate facility Ø Twin infrared safety beams, preventing closure onto vehicles. The twin beam is immune to snow, fog and frosting, providing secure reliable detection. Designed to operate with a 99% beam reduction due to poor weather conditions. Ø Manual hand crank, for use in a power failure Ø The Support Gantry and Gate leaf are fully hot dipped galvanised Ø Optional- Anti-Tamper Siren, built into our series 4 gates which sounds if the gate is tampered with Ø Connect intruder alarms directly to our intelligent controller, providing you with remote notification of any attempt to force the gate open. Ø Local Emergency stop buttons Ø Long Life Orange Flashing beacon reduces maintenance and complies with safety legislation. Ø Drive chain protection, increases the operating life span and reduces maintenance costs. Ø Optional Advanced Safety Intelligence- Our purpose designed gate controller prevents accidental crushing of persons around the working area of a remotely controlled automatic gate. The intelligent controller determines which direction the gate is travelling in, and should a person come into contact with gate or gantry the moving part of the gate will reverse in the opposite direction by 50mm and then stop preventing serious injury. A local sounder can be programmed to sound, warning anyone to move away from the gate. Our Intelligent anti-crush design has been developed to exceed modern safety legislation standards. Ø Optional Powder Coating in any RAL colour of your specification. Ø Optional- Moving machinery Act approved compliant category3 detection devices are installed on our remotely operated gate ranges and are optional on our automated dead man controlled gates. The detection also features a safety crush prevention zone after detection, further minimizing any accidental injury. Ø Accurate to within 10mm to ensure precision breaking stops the gate leafs in the correct position Ø Fast opening/closing time Ø Manufactured and electrically controlled with Paramount Precision Ø Super-Low energy consumption
RAL Colour chart- Optional powder coating can customise a gate into your own corporate colours, or will match with an existing or new powder coated fence. (Colours are provided for reference only, please ask for a colour chart)
For more information or to request a site visit, please contact our sales team on 01782 833333 Or email us at post@steelfence.co.uk
Our 24hr Service Centre offers end users with support and after sales care, we can provide a service or maintenance package to suit all of our product ranges, and keep your automated gate in the best of condition. Serviced products offer end users with exceptional reliability and a long life span.
Contact Our Sales team for Export Enquiries
Made In England

If you do not have a vertical navigation bar to the left please click here